 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
Three models available with standard options as listed
COIN ARTIST with Counters Model 300-1 $749
Includes Nickel chute and speed control. Shipping is $30 in US $50 into Canada
this model is for the serious hobby and light commercial user. The powder coated steel
body around this unit, gives it the strength for heavy coin loads with multiple extension
hoppers. The commercial electronic re-settable counters give you good accuracy for
estimating your accepted to rejected ratio. The machine can double as a counter, but
this is not recommended as it's primary function. Sorts Copper based coins from zinc
based coins at about 18,000 per hour. ONLY A FEW LEFT... This model will be
discontinued when sheet metal stock is gone.
Includes Nickel chute and speed control. Shipping is $30 in US $50 into Canada
this model is for the serious hobby and light commercial user. The powder coated steel
body around this unit, gives it the strength for heavy coin loads with multiple extension
hoppers. The commercial electronic re-settable counters give you good accuracy for
estimating your accepted to rejected ratio. The machine can double as a counter, but
this is not recommended as it's primary function. Sorts Copper based coins from zinc
based coins at about 18,000 per hour. ONLY A FEW LEFT... This model will be
discontinued when sheet metal stock is gone.
COIN ARTIST without Counters Model 300-N $649
Includes Nickel chute and speed control. Shipping is $30 in US $50 into Canada
Same details as above except no counters. Sorts Copper based coins from zinc based
coins at about 18,000 per hour. ONLY A FEW LEFT... This model will be
discontinued when sheet metal stock is gone.
Includes Nickel chute and speed control. Shipping is $30 in US $50 into Canada
Same details as above except no counters. Sorts Copper based coins from zinc based
coins at about 18,000 per hour. ONLY A FEW LEFT... This model will be
discontinued when sheet metal stock is gone.
APPRENTICE Model 300-A $499 Includes one extension hopper.
Unit is set up for pennies (Both US or CANADIAN)
Nickel chute and speed control optional for $50 more. Shipping Included in continental US,
$25 into Canada. Nickel Chute used primarily to sort Canadian Nickels, Speed control used
to slow down feed slightly, only when running nickels.
Same functionality as the Coin Artist. But unit has open design, so there is more coin
noise, and it must sit on the edge of a table, and drop coins into boxes or buckets below
the machine. Sorts Copper based coins from zinc based coins at about 18,000 per hour.
Due to changes in electronics (beyond my control) COUNTER NO
LONGER AVAILABLE Sorry.
Unit is set up for pennies (Both US or CANADIAN)
Nickel chute and speed control optional for $50 more. Shipping Included in continental US,
$25 into Canada. Nickel Chute used primarily to sort Canadian Nickels, Speed control used
to slow down feed slightly, only when running nickels.
Same functionality as the Coin Artist. But unit has open design, so there is more coin
noise, and it must sit on the edge of a table, and drop coins into boxes or buckets below
the machine. Sorts Copper based coins from zinc based coins at about 18,000 per hour.
Due to changes in electronics (beyond my control) COUNTER NO
LONGER AVAILABLE Sorry.
| Now IN STOCK |
ORDERING A MACHINE
If you are interested in a machine, I take payments to Andy@ryedalecoin.com through Paypal,
I also take orders using a Visa or Mastercard, but only by phone. Use the link on the
Contact US page to reach me, or use my email address andy@ryedalecoin.com
Thanks again Andy
If you are interested in a machine, I take payments to Andy@ryedalecoin.com through Paypal,
I also take orders using a Visa or Mastercard, but only by phone. Use the link on the
Contact US page to reach me, or use my email address andy@ryedalecoin.com
Thanks again Andy
| Now IN STOCK |
| Now IN STOCK |